Excavator top Type Hydraulic Rock Breaker for sale - POIN
Excavator top Type Hydraulic Rock Breaker for sale - POIN
Excavator top Type Hydraulic Rock Breaker for sale - POIN
Excavator top Type Hydraulic Rock Breaker for sale - POIN
Hydraulic Breaker

Excavator top Type Hydraulic Rock Breaker

Excavator Size: 0.8 – 120 tons
Suitable Carrier: 0.07 – 3.2m³
Diameter of Tool: 40 – 230mm

Inquire Online

  • Check Mark Quality assurance
  • Check Mark Fast delivery
Category:

Description

Top Type Hydraulic Breaker is one of the most popular types of hydraulic breakers. It is selected for low noise, saving energy, and protecting the environment. POIN has a full range of Hydraulic Breakers for excavators from 4 – 55 tonne. They are suitable for all kinds of brands and models of excavators.

Product Parameters

Technical SpecificationsModelPB40PB45PB53PB68PB75PB80PB85PB100
Body Weightkg53 71 89 156 214 215 282 479 
Total weight (Side/Top/Box)kg70/
72/
102		95/
95/
129		158/
158/
155		263/
343/
361		334/
409/
450		335/
410/
451		559/
637/
733		761/
866/
1007
Length (Side/Top/Box)mm918 1090 1178 1373 1515 1630 1735 1994 
1086 1235 1344 1684 1706 1738 2120 2387 
1190 1331 1417 1660 1712 1717 2074 2354 
Width (Side/Top/Box)mm226 265 285 385 385 385 443 443 
206 226 285 385 390 390 458 458 
260 260 350 385 385 385 458 458 
Height (Side/Top/Box)mm360 435 500 696 735 760 910 966 
189 200 370 486 486 486 570 570 
295 295 305 486 486 486 570 570 
Operating pressurekg/cm

psi

bar		90-12090-12090-120110-140120-150120-150130-160150-170
1280-17001280-17001280-17001562-19881704-21301704-21301846-22722130-2414
88-11788-11788-117108-137118-147118-147128-157147-166
Hydraulic flow rangeL/min15-2520-3025-5040-7050-9050-9060-10080-110
Impact frequencybpm800-1400700-1200600-1100500-900400-800400-800400-800350-700
Diameter of hose
mm
inch		12.7 12.7 12.7 12.7 12.7 12.7 19.05 19.05 
1/21/21/21/21/21/23/43/4
Diameter of Toolmm40 45 53 68 75 80 85 100 
Weight of Toolkg4 8 9 18 22 26 29 57 
Suitable Carrierm³0.07 0.03-0.010.06-0.20.15-0.30.2-0.350.2-0.350.25-0.50.4-0.6
Suitable excavatorton0.8-2.51.2-3.02.5-4.54-76-96-97-1410-15
Valve Typeinsideinsideinsideinsideinsideinsideinsideinside
Accumulator existswithoutwithoutwithoutwithoutwithoutwithoutwithoutwithout
Technical SpecificationsModelPB125PB135PB135APB140PB140APB150PB155PB165PB165LPB175
Body weightkg620 850 846 920 956 1092 1313 1442 1590 1960 
Total weight (Side/Top/Box）kg1277/
1308/
1371		1653/
1847/
1893		1680/
1880/
1930		1774/
2059/
2011		1809/
2094/
2046		2218/
2380/
2457		2577/
2745/
2968		2751/
3156/
2916		3277/
3447/
2975		3905/
4057/
3902
Length (Side/Top/Box）mm2285 2423 2427 2480 2480 2640 2776 2820 2820 3184 
2673 2900 2656 2866 2866 2897 3102 3286 3446 3812 
2578 2847 2646 2793 2793 3002 3075 3337 3460 3723 
Width (Side/Top/Box)mm555 575 575 575 575 665 665 665 665 764 
555 575 575 575 575 665 665 665 665 764 
575 575 575 575 575 665 665 665 665 764 
Height (Side/Top/Box)mm1120 1202 1202 1350 1335 1343 1382 1378 1445 1670 
600 710 710 710 710 760 760 840 840 920 
625 710 710 710 710 760 760 840 840 920 
Operating pressurekg/cm²

psi

bar		150-170160-180160-180160-180160-180160-180160-180160-180170-200180-210
2130-24142272-25562272-25562272-25562272-25562272-25562272-25562272-25562272-25562272-2556
147-166157-177157-177157-177157-177157-177157-177157-177157-177157-117
Hydraulic flow rangeL/min90-120130-150145-180120-180120-180150-190180-240200-260200-250200-260
Impact frequencybpm350-650400-600360-460350-500350-500350-700300-450250-400250-380200-350
Diameter of hosemm
inch		25.4 25.4 25.4 25.4 25.4 25.4 31.75 31.75 31.75 31.75 
1 1 1 1 1 1 11/411/411/411/4
Diameter of Toolmm125 135 135 140 140 150 155 165 165 175 
Weight of Toolkg94 115 115 126 126 157 190 224 215 260 
Suitable Carrier3 0.5-0.70.6-0.80.6-0.80.7-0.90.7-0.90.9-1.61.1-1.41.2-1.51.2-1.61.4-1.8
Suitable excavatorton1.5-1818-2618-2618-2618-2627-3528-3530-4030-3535-40
Valve Typeinsideoutersideoutersideinsideinsideoutersideoutersideoutersideinsideinside
Accumulator existswithoutwithwithwithoutwithwithwithwithwithwith
Technical SpecificationsModelPB175LPB185PB195PB200PB205PB210PB215PB220PB230
Body Weightkg1850 2430 2663 3100 3100 3550 4065 3959 4153 
Total weight (Side/Top/Box)kg3714/
4047/		4308/
4813/		5043/
5168		58001/
60001/		6300/
6500/		6687/
6997/		7150 7700 8503 
Length (Side/Top/Box)mm31703786 3326 3420 3520 3533 3660 3780 
3945 4021 4120 4200 4288 4288 
Width (Side/Top/Box)mm764 764 764 804 834 864 900 
764 790 764 804 834 864 864 
Height (Side/Top/Box)mm1605 1567 1635 1750 1845 1945 2150 
920 930 930 980 1000 1013 1013 
Operating pressurekg/cm²
psi
bar		180-220190-220190-220200-240200-240200-240260-310290-330290-330
2556-31242556-31242556-31242556-31242556-31242556-31242556-31243836-42633836-4263
177-217177-217177-217177-217177-217177-217177-217353-412373-451
Hydraulic flow rangeL/min220-270220-270220-290260-300290-350290-350330-375360-420380-460
Impact frequencybpm200-300200-250180-200165-200100-150150-200110-15090-13090-130
Diameter of hosemm
inch		31.75 31.75 31.75 31.75 31.75 31.75 31.75 11/211/2
11/411/411/411/411/411/411/4
Diameter of Toolmm175 185 195 200 205 210 215 220 230 
Weight of Toolkg260 283 353 390 400 416 430 450 510 
Suitable Carrierm³1.4-1.81.4-2.01.6-2.22.2-32.4-32.4-3.22.4-3.2
Suitable excavatorton35-4536-4540-5550-6055-6560-8065-8065-8080-120
Valve Typeoutersideoutersideoutersideoutersideoutersideoutersideoutersideoutersideouterside
Accumulator existswithwithwithwithwithwithwithwithwith

Breaker hammer & Tools

  • Excavator Box Type Hydraulic Rock Breaker for sale - POIN
  • Excavator Box Type Hydraulic Rock Breaker for sale - POIN

Breaker hammer & Tools

Blunt Tool

Blunt Tool

Crushing large rock pieces in quarries
Crushing slag
Ground compression

Flat Chisel

Flat Chisel

General use with additional cutting action
Drawing pits in rocky subsoil
Separating rock slabs

Pipe driver

Pipe Driver

For driving in pipes
Produced according to request

Moil Point

Moil Point

General Use With Demolition Work And in Quarries, Breaking Up Slag In Steel Mills (industrial Application), Demolishing Foundations, Roadway Driver And Roadway Shots In Mining Forged Point

Tamping Tool

Tamping Tool

Forged plate, 200*200mm
Incl.adaptor for shank ends to max.φ75mm
Compression of ground and gravel

Elephant Foot

Elephant Foot

Demolishing reinforced concrete areas
Crushing large rock pieces in quarries
Ground compression

Asphalt Cutter

Asphalt Cutter

General use with additional
Cutting action
Cutting asphalt or soft material

Ramming Tool/Post Hole Driver

Ramming Tool/Post Hole Driver

For beating in poles and pipes Produced according to request.

Percussion Buster

Percussion Buster

For shank ends from φ55 to 180mm
All demolition work in concrete &very tough rock
Special demolition with high cracking action

Practical tips for using demolition tools

POIN hydraulic breaker tools are only intended and suitable for use in machines equipped with matching tool carriers. Please observe the machine manufacturer’s operating instructions and safety notes. POIN assumes no liability for misuse of tools. This is how to preserve the great functionality, safety and reliability of POIN breaker tools:

Especially before inserting into the hammer, apply a lot of grease on high-stress tools.

Especially before inserting into the hammer, apply a lot of grease on high-stress tools.

Avoid too much play between chuck bushing and tool to prevent tool breakage or damage to the chuck bushing.

Avoid too much play between chuck bushing and tool to prevent tool breakage or damage to the chuck bushing.

Operate your breaker only after having positioned the demolition tool on your work surface. stop hammer immediately when the material breaks up.

Operate your breaker only after having positioned the demolition tool on your work surface. stop hammer immediately when the material breaks up.

The correct strike position should be a 90°angle to the work surface. The shank,chuck and carrier should form a unit.

The correct strike position should be a 90°angle to the work surface. The shank,chuck and carrier should form a unit.

Use only short strikes (a maximum of 10 seconds), re-move hammer and choose new angle of attack. If the tool heats up, allow the tip of cutting edge to air-cool.

Use only short strikes (a maximum of 10 seconds), remove the hammer & choose new angle of attack. If the tool heats up, allow the tip of the cutting edge to air-cool.

Use a gradual approach to break up material section by section.

Use a gradual approach to break up material section by section.

Lubrication: Apply high pressure grease at least 4 times daily to make sure the lubricating film does not break.

Lubrication: Apply high pressure grease at least 4 times daily to make sure the lubricating film does not break.

Tool reconditioning: dull tips or edges damaged tools can be reconditioned with milling, planing or lathing.

Tool reconditioning: dull tips or edges damaged tools can be reconditioned with milling, planing or lathing.

Pins & lock

Komatsu Series
Machine modelReference imagePart No.DescriptionUnit weight/kgs
PC60 Pins & lock 20X-70-00150PIN(ø17x69mm)0.15
PC100203-70-74218PIN(ø19.5x80mm)0.18
PC20009244-02496PIN(ø25x101mm)0.33
PC30009244-02516PIN(ø25x120mm)0.44
PC40009244-03036PIN(ø30x152mm)0.85
PC600/650209-70-54240PIN(ø36x175mm)1.32
PC1250/100021N-72-14330PIN(ø40x175mm)1.58
Caterpillar Series
Machine modelReference imagePart No.DescriptionUnit weight/kgs
CAT J200/305 Caterpillar Series 8E6208PIN(ø11x57mm)0.045
8E6209LOCK(ø22x57mm)0.025
4T0001LOCK(ø18x57mm)0.11
CAT J225/3076Y3228/1324762PIN(ø14x65mm)0.078
8E6259/1495733LOCK(ø30x65mm)0.03
CAT J250/3128E6258/1324763PIN(ø14x77mm)0.1
8E6259/1495733LOCK(ø30x77mm)0.03
3G9609LOCK(ø27x77mm)0.03
CAT J300/3159J2308/1324766PIN(ø14x92mm)0.13
8E6259/1495733LOCK(ø30x92mm)0.03
3G9609LOCK(ø32x92mm)0.03
CAT J350/3208E6358/1140358PIN(ø19x105mm)0.28
8E6359/1140359LOCK(ø39x105mm)0.04
3G9459LOCK(ø32x105mm)0.66
CAT J400/3257T3408/1167408PIN(ø22x118mm)0.4
7T3409LOCK(ø32x118mm)0.04
8E8409/1167409LOCK(ø43x118mm)0.04
CAT J450/3306Y2527/1U1458/9W8296PIN(ø19x130mm)0.28
8E6359/1140359LOCK(ø39x130mm)0.04
3G9549LOCK(ø32x130mm)0.82
CAT J460/3308E0468/1140468PIN(ø24x133mm)0.29
8E8469/1073469LOCK(ø44x133mm)0.48
CAT J550/3456Y8558/1073378PIN(ø25x163mm)0.05
8E5559/1078559LOCK(ø52x163mm)0.63
3G9559LOCK(ø48x163mm)2.3
CAT J600/3656I6608/1139608PIN(ø30x192mm)1.1
6I6609/1139609LOCK(ø59x192mm)0.12
D49W2668PIN(ø19x85mm)0.52
1U2405LOCK(ø38x85mm)0.04
D5/D6/D79W2678PIN(ø19x105mm)0.22
1U2405LOCK(ø38x105mm)0.04
D8/D854T2479/7J9600PIN&LOCK(ø25x120mm)0.28
D9/D11102-9062/3G0500PIN&LOCK(ø32x150mm)0.96
Hyundai & Liugong Series
Machine modelReference imagePart No.DescriptionUnit weight/kgs
HY200 Hyundai & Liugong Series E161-3035PIN(ø20x110mm)0.26
61ES-11150LOCK(ø32x110mm)0.04
HY290E262-5004PIN(ø20x121mm)0.3
S411-180002/61E11150LOCK(ø34x121mm)0.04
HY45061E7-0105PIN(ø25x155mm)0.6
61EH-11150LOCK(ø45x155mm)0.05
LG40LG40PIN(ø18x100mm)0.18
LOCK(ø31.5x100mm)0.6
Daewoo Series
Machine modelReference imagePart No.DescriptionUnit weight/kgs
DH130 Daewoo Series 2705-9014PIN(ø18x87mm)0.16
2705-9015LOCK(ø30x87mm)0.47
DH2202705-1020PIN(ø19x107mm)0.22
2114-9008LOCK(ø34x107mm)0.75
DH2802705-9010PIN(ø19x121mm)0.26
DH3002114-9008LOCK(ø34x121mm)0.85
DH3602705-1021PIN(ø22x131mm)0.38
2114-1849LOCK(ø35x131mm)0.97
DH4202705-1034PIN(ø25x155mm)0.58
2114-1931LOCK(ø45x155mm)1.9
CAT J7004T4708/1134708PIN(ø32x195mm)1.2
4T4707/1134709LOCK(ø63x195mm)0.175
CAT J8001341808/1020101PIN(ø35x240mm)1.8
1341809/1012834LOCK(ø35x70mm)1.05
Esco Series
Machine modelReference imagePart No.DescriptionUnit weight/kgs
ESCO KELLY(22R10) ESCO Series 22-RPPIN(ø13x81mm)0.08
22-RBLOCK(ø21x68mm)0.15
ESCO KELLY(25R12)25-RPPIN(ø13x95mm)0.09
25-RPPIN(ø21x67mm)0.17
ESCO KELLY(35R15)35-RPPIN(ø13x121mm)0.12
35-RBPIN(ø23x83mm)0.26
DH55(18S) ESCO Series 18PNPIN(ø6x53mm)0.01
18LKLOCK(ø12x36mm)0.025
25S25-30PNPIN(ø9x73mm)0.11
25-30LKLOCK(ø11x39mm)0.025
35S35PNPIN(ø11x86mm)0.12
35-40LKLOCK(ø15x48mm)0.02
40S40PNPIN(ø13x100mm)0.3
35-40LKLOCK(ø15x48mm)0.02
45S45PNPIN(ø14x116mm)0.4
45LKLOCK(ø16x57mm)0.03
E-Bolt & Nut Series
Machine modelReference imagePart No.DescriptionUnit weight/kgs
E24/27/27R/27L E-Bolt & Nut Series E24/27/27R/27LPIN(ø64x16mm)
E28/29/29R/29LE28/29/29R/29LLOCK(ø56x16mm)
E25/25R/25LE25/25R/25LPIN(ø64x19mm)
E39E39PIN(ø90×25.4mm)
Kobelco Series
Machine modelReference imagePart No.DescriptionUnit weight/kgs
SK200 NEW Kobelco Series SK200 NEWPIN(ø18x111mm)0.21
LOCK(ø30x111mm)0.6
SK200 OLDSK200 OLDPIN(ø18x111mm)0.21
LOCK(ø33x111mm)0.72
SK230 NEWSK230 NEWPIN(ø22x131mm)0.37
LOCK(ø35x131mm)0.96
SK230 OLDSK230 OLDPIN(ø22x131mm)0.37
LOCK(ø35x131mm)0.97
  • Piston
    Piston
  • PN-B001
    PN-B001
  • PN-B002
    PN-B002
  • PN-B003
    PN-B003
  • PN-B004
    PN-B004
  • PN-B005
    PN-B005
  • PN-B006
    PN-B006
  • PN-B007
    PN-B007
  • PN-B008
    PN-B008
  • Cylinder Block
    Cylinder Block
  • PN-C001
    PN-C001
  • PN-C002
    PN-C002
  • PN-C003
    PN-C003
  • PN-C004
    PN-C004
  • PN-C005
    PN-C005
  • PN-C006
    PN-C006
  • PN-C007
    PN-C007
  • PN-C008
    PN-C008
  • Bolt
    Bolt
  • PN-D001
    PN-D001
  • PN-D002
    PN-D002
  • PN-D003
    PN-D003
  • PN-D004
    PN-D004
  • PN-D005
    PN-D005
  • PN-D006
    PN-D006
  • PN-D007
    PN-D007
  • PN-D008
    PN-D008
  • Thrust & Outer bush
    Thrust & Outer bush
  • PN-E001
    PN-E001
  • PN-E002
    PN-E002
  • PN-E003
    PN-E003
  • PN-E004
    PN-E004
  • PN-E005
    PN-E005
  • PN-E006
    PN-E006
  • PN-E007
    PN-E007
  • PN-E008
    PN-E008

Reviews

There are no reviews yet.

Be the first to review “Excavator top Type Hydraulic Rock Breaker”

Your email address will not be published. Required fields are marked *

Related products